Personal Nuclear Radiation Detecor X Y Beta Gamma Ray Detector Portable Digital Mini Gamma Geiger Counter Detector
Product Parameters of Nuclear Radiation Detecor
| Detection Counting | 48mm Geiger counter tube |
| Measuring Range | 0.05uSv~10mSv |
| Working Environment | 0.05uSv~10mSv |
| Battery Capacity | 350mah |
| Battery Life | 15~24 hours |
| Charging Time | 1 hour |
| Charging Method | USB-type-c |
| Product Size | 16*27*150MM |
| Body Material | Aluminum alloy |
| Screen Size | 0.96 inch TFT color screen |
Instruction of Nuclear Radiation Detecor
1. Shutdown/pause button/return to the main interface: long press for 2 seconds to shut down/start; during startup, short press to pause real-time data, short press again to continue real-time data. Short press this button on any interface other than the main interface to return to the main interface function (pause or real-time icon reminder)
2. Page turning button: Short press to cycle through the three functional interfaces. Real-time > maximum value + average value + total value > histogram (with interface navigation bar). When switching to the other two interfaces, it will stay for a long time, unless switching back or Short press 1 key to return to the main interface.
3. Mute/vibration button/screen off: Short press to cycle through the reminder mode: only sound reminder-only vibration reminder-sound and vibration reminder-close reminder, this button is only effective in interface 1 and interface 2. This button has no function in other interfaces (since other pages do not display sound and vibration reminder icons, so other interfaces do not set the function of this button). Long press is the off screen, short press any button to turn on the screen during the off screen.
4. Set the alarm value: Short press to enter the alarm value setting: short press once is the maximum alarm, short press again is the total alarm. Long press in these two interfaces to enter the setting, the alarm value flashes during setting, short press the page turning button to select the alarm value, short press again to save and exit. In the two interfaces of 4, there is no operation for 5 seconds or short press the 1 button to save the current settings and exit to the main interface.
Interactive Description
Software Interaction Logic of Nuclear Radiation Detecor
1. Hello on startup interface, good-bye on shutdown interface.
2. Ring the alarm sound beep beep, and the prompt time is 1 second. (every time from low to high, it is triggered once when the alarm value is exceeded)
3. Vibration reminder, the reminder time is 0.5 seconds. (every time from low to high, it is triggered once when the alarm value is exceeded,)
4. The LED light of the main unit flashes, the green light flashes when it is lower than the alarm value, and the flashing frequency is once a second, and the red light flashes when it is higher than the alarm value, once every 0.5 seconds.
5. When the real-time data on the main interface is lower than the alarm value, it will display a green value, and if it exceeds the alarm value, it will display a red value.
Product Tags:
|
|
X Y Beta Gamma Ray Personal Nuclear Radiation Detector Portable Digital Mini Images
|
